FOURTH GENERATION OF SOLAX HYBRID INVERTERS

Solax Power needs no introduction to PV professionals. Based on more than ten years of experience in the production of photovoltaic inverters (2011) and more than eight years of hybrid inverter development (2013), Solax Power, in cooperation with the leading university Zejiang University in China's "Silicon Valley", presents the fourth generation of hybrid inverters for use with battery storage.

8 reasons to choose the Solax 4G hybrid system

Although the third generation has earned a well-deserved firm position in the hybrid inverter market, Solax Power comes with a new and improved fourth generation. The user and installer of the new generation can look forward to several fundamental improvements, pushing its added value even further ahead of the competition. Major changes include:

1. Achieving up to 150% asymmetry on one phase. Especially in the Czech environment, the asymmetric operation of the inverter is a very important function. However, the inverter can now distribute the produced energy even more efficiently on the individual phases. In practice, this means that with increased consumption on one phase, the inverter can transfer up to 150% of the rated power to the phase where it is needed. For the user, this brings an even higher use of solar energy, either directly from panels or accumulators.
   
   
2. Almost zero overflows into the network. Although a number of available hybrid inverters offer the function of zero flows into the grid, in practice it usually looks different. Especially with small current consumption, inverters have a problem eliminating overflows. However, the fourth generation of Solax hybrids reaches a maximum of around 8-14W even on unloaded phases.
   
   
3. Integrated BACKUP and backup speed <10ms. Newly, to simplify the system and save input costs, the function of the external EPS box is integrated directly into the inverter. In addition, however, the integrated contactors allow switching to the backup source in the event of an AC failure in <10ms! This will also ensure the smooth operation of most computers.
   
   
4. Even easier to install. The installation company will especially appreciate this advantage. In addition to significantly faster assembly (within 30 minutes), it is not necessary to have the inverter connected to the grid or to photovoltaics. The internal voltage from the accumulator is enough to revive the system, giving plumbers more flexibility during installation.
   
   
5. Power range up to 15kW. The fourth hybrid generation is now available in outputs of up to 15 kW at the output to the network. The offer also includes two additional power variants of 12 kW and 15 kW, while both variants can be oversized up to 18 kWp at the photovoltaic input. Inverters are thus also suitable for smaller industrial applications, where energy needs to be stored in accumulators. For larger applications, there is also the possibility of connecting up to ten inverters in parallel, where up to 8 T58 batteries (5.8kWh) can be connected to each three-phase inverter. Thus, the maximum capacity of the entire system is 464kWh.
   
   
6. More efficient consumption management. The hybrids are newly equipped with a potential-free output relay for signaling surpluses. The relay is used to maximize the use of produced energy by setting the flow parameters in the inverter from photovoltaics or the battery (in connection with SOC). You can simply direct the energy from the surplus to any appliances, e.g. a house heating system, water heating or a wallbox for charging an electric car.
   
   
7. All-in-one solution. Solax Hybrid G4 can be purchased in two versions. One variant is for installing the inverter separately and the other is for the All-in-one solution with T30 batteries. To install the second variant, it is necessary to purchase a so-called Matebox, which not only significantly shortens and simplifies the installation of the entire system, but the end user gets one design device that contains everything (inverter and battery). The attractive all-in-one design was awarded in the prestigious Red Dot Award Product Design 2021 competition. Last but not least, the entire system has IP65 protection, with the option of being placed outdoors.
   
   
8. Minimization of own consumption. Compared to the previous generation, the value of the inverter's own energy consumption has decreased by 10W.

For more information, contact us at GBC Solino s.r.o., where specialists will be happy to answer your further questions or help you configure your PV system - obchod@gbc-solino.cz